KOTEL-SERVIS, LLC

1. Hydrochemical cleaning of heat power equipment. Cleaning the heating surfaces of all types of boilers (steam, hot water, water pipe, fire tube, heat exchanger) and heat exchange equipment: heaters and cooling systems, heat exchangers, pipelines of any diameter, turbine condensers, etc. from deposits of hardness salts, metal oxides, oils, technological pollution, etc.
2. Cleaning the heat exchangers of cooling towers and evaporative condensers Baltimore, DECSA and other similar ones.
3. Cleaning PSV (vertical network water heater)
4. Prestarting and operational alkalization of boilers.
5. Preservation of heat power equipment with film-forming amines (ODACON technology). This technology allows you to:
6. Flushing, pressure testing, installation, repair of heating systems.
7. Cleaning of oil systems of turbines, compressors, etc.

8. Design, installation, commissioning, start-up and maintenance. water treatment. HVO installations of various complexity and purpose. Deironing plants.
9. Chemical cleaning and neutralization of sulfur-black deposits on the outer surfaces of air heaters, economizers, superheaters and the tube part of boilers operating on fuels with a high sulfur content (fuel oil, coke oven gas, etc.).
10. Design and installation of plants for the removal of sulfur deposits by chemical means without shutting down the boiler.
11. Installation of pressure pipelines from PVC pipes.
12. Calculation of the heat load of the network, the calculation of throttle washers.

Chemical cleaning: ● is an alternative to major repair or replacement of equipment, and the cost is much cheaper; ● cleaning is done without disassembly, dismantling and drilling equipment, which significantly reduces the time and cost of repairs; ● with the high quality cleaning in all areas of the equipment, the reagents do not react with the metal and seal materials (hydrochloric acid and solutions on its basis do not apply); ● no danger of mechanical damage; ● reduction process boonratana; ● reduction of the hydraulic resistance of pipelines and equipment; ● reduce the consumption of energy by 10-15; ● clean is an environmentally friendly process; ● development of the technology of washing, selection of composition and concentration of the reagents is made individually for each type of equipment and composition of deposits; ● complete removal of deposits and the application of passivation on the metal surface.