YUS-METALL, TOV

Manufacturing of metal structures and metal processing services in the city of Kyiv.
The manufacturer of metal structures ”YUS Metal” produces both standard and custom-made products. The production process in the workshop allows the production of both light interior elements and large hangars.

Metal processing services:

Plasma cutting of metal is considered one of the most effective ways of cutting sheets of various metal alloys and cutting parts of non-standard shapes with an accuracy of a fraction of a millimeter.

We offer the following types of work in Kyiv:
- plasma cutting of steel;
- plasma cutting of aluminum;
- plasma cutting of stainless steel;
– processing of non-ferrous metals.

METAL WELDING
The most common technological types of welding
Welding requires a source of energy to melt or apply pressure to the edges of the metal being joined. Based on the types of energy source, the following types of welding are distinguished:

Arc welding. This is welding based on melting metal. The edges are heated using an electric arc. It can be performed in manual, mechanized and automatic modes, depending on the specific task.
-gas welding. The same thermal effect on the edges of the metal being welded is only carried out due to the combustion of flammable gases.
-Laser welding. The energy source is a quantum laser generator, welding is performed with a laser beam.
-Electron beam welding. For welding refractory and chemically active metals and alloys.
-Ultrasonic welding. The energy source is ultrasonic vibrations. Used for point and contour connections.
Depending on the degree of mechanization of the welding process, there are:
manual;
-mechanized;
-automated;
-automatically.
Also, based on the continuity of the process, welding is divided into intermittent and continuous.

Company ”YUS-Metal” - operational welding work on aluminum and stainless steel.

Drilling holes
A range of metalworking works would be incomplete without metal drilling services. Holes in metal are necessary for various technological purposes, for example:

- the following connection using a thread;
-technological holes for cables, bolts, fasteners;
- further separation of the metal sheet.
Drilling holes in metal is done using special tools - drills, which create holes of the appropriate diameter and depth. In this case, the resulting holes can be either through or blind. The following types of drilling are distinguished:

- drilling cylindrical holes;
-drilling holes of different shapes;
-reaming (increasing the diameter) of existing holes;
-centring, drilling small depths;
-deep through drilling.
The YUS-Metal company drills holes in metal of large and small diameters, to a depth of 2 to 60 mm. For this we have all the necessary equipment, machines and drills, as well as professional craftsmen. You can always check the cost of such a service with our manager by calling the phone number listed on the website.

PROFILE PIPES BENDING
The Kiev company ”YUS-Metal” bends profile pipes using special bending equipment. In general, this is a very widely demanded cold rolling process, which has the following advantages:

- obtaining the required geometry;
-reducing the number of connections;
-lack of seams in bending areas.

CUTTING WITH Ribbon Pollen
We cut metal with a special band saw.
-cleanliness of the cut, absence of edges and scale;
- evenness of the edge, which does not require additional processing;
-high productivity and short turnaround time.

CUTTING THREAD
”US Metal” is a metal structures production company that is ready to undertake the design and production of metal products. The production takes active orders with standard sizes, as well as for individual requests.

The cost of the work depends on the specifics of your order. You can discuss these points with the company’s managers, who will be able to provide a free consultation.

The US Metal company is ready to fulfill orders for cutting metric threads from M6 to M42.

Below we present the most common sizes for cutting a rod:

The threaded rod is actively used for hanging cable routes and anchor blocks. At US Metal, specialists are ready to make cutting as quickly as possible in the Svyatoshinsky district on Academician Vernadsky Boulevard. At the same time, the cost of cutting starts from 50 UAH. and depends on the individual characteristics of the order.
MANUFACTURE OF ADVERTISING STRUCTURES ON METAL
THE MANUFACTURE OF ADVERTISING STRUCTURES ON METAL WILL BE MADE FOR YOU BY THE YUS-METAL COMPANY.
Facade advertising structures
Internal advertising structures,
Shelves for goods,
Warehouse shelves,