- Bitumen-polymer tape for corrosion protection of underground pipelines;
- Services to isolate the steel pipe;
- Pre-insulated steel pipes;
- Bitumens and mastics
- Industrial water treatment systems (reverse osmosis) for different purposes
Advantages of the company ”INNOVATION”:
- Economic benefits
- No changes in the application of existing technologies
- The service life of up to 30 years
Tape polymer bitumen Inteyp
When laying underground steel pipelines (State Standard 4219 - 2003), the problem arises of the need to protect the pipeline from corrosion.
The choice of material depends on the operating environment of the pipeline and produce the desired result.
As a rule, the reliability, durability, ease of application and economic benefit.
The advantage of the system Inteyp corrosion is the presence in its composition Asmol. Its use greatly distinguishes the system of physical and chemical characteristics from analogues.
The process of applying polymer tape on bitumen pipeline is technological. The system is an insulating material, which allows to work on the pipe insulation, regardless of the time of year, including winter.
Polymer-bitumen Inteyp system has been widely used for insulation of different containers, tanks, containers, insulation welds and curvilinear sections of pipelines
Since 2013, mastered the production of heat-resistant polymer tapes based on PVC or polyethylene for wrapping a layer of insulating coatings.
The main task of wrapping tape is the protection of anticorrosion coating of soil caused by the shift of mechanical damage.
Our company also offers a hot bitumen and mastic coating.
INSULATION PIPES AND TANKS
To protect the outer surface of steel pipes and tanks from corrosion Ltd. ”Innovation” offers production work on the isolation. Process and insulation of the material corresponds to the requirements of DSTU 4219-2003.
Anti-corrosion coating is a ternary. It consists of a primer to a thickness of 250-300 microns, bitumen-polymer layer thickness of 1 mm and an outer layer of PVC or polyethylene, of thickness of 0.6 mm. The total thickness of the insulation coating at 50% overlap is not less than 3.6 mm.
Pipe insulation is carried out on plant equipment, which guarantees the quality of the application tape.
The peculiarity of our production - cold application tape application. This reduces energy costs and delivery times, which creates economic benefits for the customer. This met all the technical requirements, as evidenced by certificates of conformity.
Pipe insulation greatly increases the duration of their lifetime.
When laying pipelines is one of the important requirements - this time of installation. The solution of this problem contributes to delivery of pre-insulated pipes to the object.
The enterprise has mastered the production of this product. As the insulation is successfully applied, polymer-bitumen tape Inteyp, has established itself as an insulating material in the main pipelines in Ukraine and Georgia. This insulating coating has a dielectric properties, waterproof, flexible and have the necessary adhesion. The material complies with DSTU 4219 and has corresponding certificates and test reports.
The tube is available as from leading manufacturers of pipe products, as well as directly by the customer.
Technical requirements and test methods according to GOST 10707-76 (91). If necessary, it is possible to perform heat treatment of pipes.
steel pipes in foam with protective waterproofing coating (VSN 008-88)
Insulated pipes with protective and waterproofing coating designed for channel-free laying of underground heating mains.
Pipes with thermal insulation made of polyurethane foam applied at ambient temperature from -30 to + 50 ° C and the water temperature up to 150 ° C Teplogidroizolyatsionnoe coating provides the necessary operating temperature of the pipeline and protects the steel pipes from corrosion. Expected service life of pipelines with thermal insulation made of polyurethane foam at least 30 years.
- Anticorrosion layer based neftepolimera ”Asmolov”;
- Insulating layer of polyurethane foam (Styrofoam or optional);
- Protective layer - adhesive bitumen-polymer coating (VSN 008-88)
The use of self-adhesive tapes is also possible for local repairs of underground waterproofing coating areas of heating.
construction of pipelines, construction of pipelines, repair of pipelines, tape bitumen-polymer, anticorrosive materials, tape insulation, waterproofing pipelines, waterproofing pipes, steel pipes, pipes for underground gas pipelines, isolated pipes, pre-insulated pipes, pre-insulated pipes, pipe insulation, pipe insulation insulation of steel pipes, waterproofing of steel pipes, waterproofing pipes, waterproofing, waterproofing mastics, bituminous-rubber, bitumen, pentair x-flow membrane ultrafiltration, antiscalant for reverse osmosis, water treatment, corrosion protection of pipes, accessories, insulation of pipes and tanks, tape polymer bitumen inteyp membrane for osmosis, multi-stage cleaning evo water modular filters modular filters for water bottling, wrapping tape, water from wells and wells evo idl1424, evo idv1424, pre-insulated pipes, industrial reverse osmosis, industrial installations filtration, steel pipes in polyurethane foam, heat insulation, ultrafiltration, ultrafiltration, filtration of water